basic configuration


vim /etc/screenrc
hardstatus string "%h%? users: %u%?"
startup_message off
hardstatus alwayslastline "hetzner03: %-Lw%{= BW}%50>%n%f*   %t%{-}%+Lw%<"
bindkey -k k7 prev
bindkey -k k8 next


The following method allows to change the name of interfaces in ubuntu. The network card below some how is not good recogized by default, one interface is named renameX by default. With this method I assign it the name enp1s0 by configuration.

First I get all mac addesses of my interfaces

ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: rename2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether 00:07:43:0c:32:12 brd ff:ff:ff:ff:ff:ff
3: enp130s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
    link/ether 00:07:43:0c:32:13 brd ff:ff:ff:ff:ff:ff
    inet brd scope global dynamic enp130s0
       valid_lft 5639sec preferred_lft 5639sec
    inet6 fe80::207:43ff:fe0c:3213/64 scope link 
       valid_lft forever preferred_lft forever

Then I enable the feature in the grub configuration to set my own interface names.

vim /etc/default/grub
GRUB_CMDLINE_LINUX="net.ifnames=0 biosdevname=0"

Apply the new configuration

grub-mkconfig -o /boot/grub/grub.cfg
update-initramfs -u

Configure the new names per mac address

vim /etc/udev/rules.d/70-persistent-net.rules
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:07:43:0c:32:12", NAME="enp1s0"
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="00:07:43:0c:32:13", NAME="enp2s0"


In my LAN I want to make use of the DNS of my OPNsense router, there for I change the setup of ubuntu to use if via the following configuration.

systemctl stop systemd-resolved 
systemctl disable systemd-resolved 
vim /etc/resolv.conf
search home 

wipe hdd

wipefs -a /dev/sda

time synchronization

apt install ntp ntpdate -y
mv /etc/ntp.conf /etc/ntp.conf.orig
vim /etc/ntp.conf
server prefer iburst
timedatectl set-ntp no
service ntp restart
ntpq -p